Black printed treasure chest with white relief panels showing an octopus, a compass rose and sea serpents, under a barrel lidFIG. 04in progress
Process
FDM · PETG
Joinery
Dovetail + mortise and tenon
Fasteners
Printed rivet pins
Interior
Gridfinity · 5×4 large
Sizes
Large · compact · shallow
Modeled in
OpenSCAD + Blender
Dated
Nov 15, 2026
3D print · sheet 4

TTRPG treasure chest

A printed chest for dice, minis and cards, joined like furniture, with swappable panels and a Gridfinity interior.

When I got back into D&D I needed somewhere to keep dice, minis and the rest of the table clutter. The printable chests I found online look good, but they’re limited. The art is printed right into the walls, so the chest you print is the chest you’re stuck with. And they sit on the table taking up room all game.

Built like furniture

Wherever I could, I used real woodworking joints. The frame goes together with sliding dovetails and mortise-and-tenon joints, and printed rivet pins lock them in place. There’s no glue, no screws and no metal hardware. Pull the pins and it comes apart.

Swap the panels

The box prints once. The frame wraps around it, and the decorated panels are sandwiched between the two. Pull the pins, slide the panels out, and the pirate chest becomes a Norse one, or an arcane library, or a dragon’s hoard. The barrel lid works the same way: curved planks and end plates drop into a dovetailed lid frame.

Gridfinity inside

The interior is a Gridfinity grid, so everything inside is a bin: a dice bin, a dice tower that comes apart and stores in its own tray, and mini storage on the way. At the table the bins come out, and the chest goes on the floor where it belongs.

Why bother

Partly curiosity. I backed a Kickstarter that promised something like this, and it has had a rough time delivering. I wanted to find out how hard it really is.

The answer so far is 29 versions. Dovetails that needed a mallet. A lid seam that wouldn’t hide. A box that slid out of its frame with one finger. Each fix meant a test print and a new version. v0.29 is on the printer now.

Panel reliefs created with Hi3D from AI-generated concept art.

Views

4 photos · click to enlarge
End of the chest with a skull-and-crossed-swords relief in the arched lid end and a sea serpent panel below
View ALid end plate and side panel. Both slide out.
Back of the chest showing two printed hinges on the top rail
View BPrinted hinges on the back rail. No metal anywhere.
Bare black frame and barrel lid frame on a workbench with no panels fitted
View CThe v0.29 frame in PETG before the panels go in
Close-up of a printed hasp and staple on the front rail with rows of rivet pin holes
View DHasp and staple, held on by printed pins

ProjectTTRPG treasure chest
Drawn byChris Mathews
LocationRaleigh, NC
Sheet4 of 7
StatusTaking jobs