The paint booth has filled up with miniatures, and some of them finally have color on them.
What’s on the bench
It’s a mix. Some are the characters Tracy and I play in our D&D game. Some are concepts I’ve built out myself, and a couple are downloads from MakerWorld. My own models usually start in Hitem3D or another generation tool, then go into Blender to be fixed and posed before they’re printable.
They come in three sizes: 28–32 mm and 40 mm for the table, and 75 mm when I want something big enough to paint properly.
The printing side
Everything here is FDM. Detailed figures go on the X1C with a 0.2 mm nozzle. The P1S and the X2D handle the rest.
Most of these prints are really support experiments. The hard part with FDM minis is getting supports off without taking the detail with them. I’ve tried auto tree supports, hand-placed tree supports, Resin2FDM-style setups and, most recently, Printfins. Each one leaves different scars in different places, and the shelf shows the progression.
The part I’m actually learning
Painting. I’ve built a lot of things over the years, but I’ve done almost no miniature painting. So right now it’s videos and practice: an airbrush for base coats and blends, then a regular brush on a handle for the detail.
The red-robed figure is the furthest along. The robe and hair came out better than I expected. The face is still a work in progress, and so am I.
Where it’s going
More of the same, on purpose. Each batch teaches me something about the models, the posing, the supports or the paint, and the next batch gets a little better. I’ll post updates as the ones in the back get their turn.





